followers 0 popularity
3
following 1

following  view all

Groups
pickthetools is not in any groups
pickthetools

Best Pole Saws (January 2020) - Buying Guide & Reviews

Feb 1st 2020 at 10:51 PM

We have put together the most important tips for you:

After each use, clean the housing with a slightly damp cloth to remove dust and other contaminants. However, make sure that no moisture gets inside the saw.

It is also recommended to clean the saw motor about once a month . You can use compressed air spray for this: it flows through the openings in the housing into the interior of the saw. This removes small particles and prevents any loss of performance.

Heavily worn saw blades have to be replaced or ground .

The best way to change the saw blade is as follows:

Disconnect your saber saw from the mains or remove the battery.

With modern variants, you generally do not need any tools : the saw blade is usually attached using a quick-release system and can be easily removed and inserted. In older devices, an Allen key is usually used, which loosens a device in which the saw blade is placed. The nut must then be tightened again. More detailed information can be found in the operating instructions for the relevant device. Best Pole Saw

<!--td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}-->

Handling a saber saw

Basically, the saber saw cuts precisely and precisely due to its high performance. Although you do not have to exert a great deal of force on the work as such, it is necessary to safely guide the device during operation. However, special metal hooks are available for this purpose, which allow the saw to be fixed. In addition, most modern saber saws are equipped with a flexible joint system that ensures greater freedom of movement.

 

When handling your saber saw, please also note the following:

 

Protective clothing must be worn when handling the device . These should at least consist of work gloves and safety glasses. If there is a lot of dust, a fine dust mask is also recommended.

Make sure that you always use the correct saw blade for your work . As a rule, you will find information on the specimens for which material they are suitable. The saw blades also have different strengths: fine saw blades are particularly suitable for thin materials, while rough inserts are used for soft wood, metal or plastic. For materials with a small thickness, saw blades with a large number of teeth should be used. Thick-walled objects can best be cut with saw blades that have a small number of teeth.

 

0 comments
Please to comment

sign in

Username
Password
Remember Me


New to IM faceplate? join free!

Lost Password? click here