followers 5 popularity
22
following 0

followers  view all

Groups
MclaurinWilliams is not in any groups
MclaurinWilliams

Packaging in International Freight Forwarding (Airfreight): Filling Materials

Oct 27th 2015 at 2:23 AM

Apart from large machines and machinery parts that are transported on the international trade lanes, smaller electronic and fragile goods are also moved by air, sea or road. Obviously, each of these modes of transport requires individual standards of packaging, as the risks vary in their form. Irrespective of the mode of transport used, one common factor is the haulage. Before a freight can be put on board a ship or an aeroplane, a lorry is required to transport that cargo to the place of loading.

The second factor that plays a generally ignored role is vibration. Vibration transmitted from the vehicle to the freight will, inadvertently, affect the content. One should not forget that a freight will be subject to various movements during transit and any form of movement will have a direct impact on the content within the packaging.

Engine vibration transmitted through the body of the lorry

Movements during loading the freight on a ULD ( fork-lift )

Movement via loading equipment during transfer into the aircraft

Take off, landing and in-flight vibration

Movements arising out of all the above factors are influencing the contents without our noticing it. Providing protection to the contents must take all these forms of influence into consideration.

This is where the so-called styrofoam chips need to be looked at in a fully different light. Chips, being loose pieces, will move because of the vibration they receive. The chips are set in (almost) continual motion which releases the air that is trapped between the gaps. This will change the density of the structure of filling material, because as the air escapes, the chips will resettle into a new formation.

The chips from the top will move gradually down, exposing the top of the contents. thus leaving that part of the freight without any protection. .

If the filling is not done well, the chips on the sides, too, will settle down, exposing the flanks of the freight. Any lateral shock will thus be passed over to the pieces inside. No external damage may be visible. Any form of damage will be brought to light only after the contents are taken out of the packaging. Advice: It is better to avoid chips and use styrofoam blocks.

For more information about Airfreight Shipping Aqaba Jordan,Ocean shipping Aqaba Jordan,Shipping cost Doha Qatar and Freight Shipping Doha Qatar please visit my website.

0 comments
Please to comment

sign in

Username
Password
Remember Me


New to IM faceplate? join free!

Lost Password? click here