yx1991

WPC Process Engineering Materials

May 21st 2015 at 7:12 PM

Want to have a material understanding of the system, its production process, we must know that, but also pay attention to some details, the details determine success or failure is not talking about it, urban treasure to give us wood construction material process.boat floor covering ideas

WPC wallboard material refers to the use of polyethylene, polypropylene and polyvinyl chloride, instead of the usual adhesive resin is mixed with more than 35% -70% of wood flour, rice husk, straw and other waste plant fiber into a new wood material, and then the plastic processing extrusion, molding, injection molding process to produce the sheet or profiles.barco picnic tables replacement boards

The polymer can add some artificial zeolite to absorb the material smell. Through a lot of crystal powder empty, the adsorbent can capture odors of small organic molecules, molecular adsorbent has been successfully used to capture the polyolefin pipe extrusion, injection and extrusion blow molding of containers, isolated packaging materials, extrusion outside packaging and sealing materials, molecules adsorbed powder can also be added to plastics as a desiccant to remove water gas.3-panel roofed information kiosks

Different sizes and shapes of extruded products increased diversity of WPC profiles is not required when a continuous sheet-like structure or a part has a complicated structure design, WPC can be formed by injection molding or compression molding, but need reduce the amount of wood filler to increase the melt flow. Moisture can degrade the performance of the composite material but also contribute to the breeding of microorganisms, so be sure to remove moisture prior to use wood filler. Before molding wood filler to be dried, generally require treated water vapor content of less than 1 to 2%.

0 comments
Please to comment

sign in

Username
Password
Remember Me


New to IM faceplate? join free!

Lost Password? click here