followers 0 popularity
following 0
ironstairparts1 is not in any groups
Clarence Walker | ironstairparts1

Renovate Your Home With Metal Stair Parts

Nov 22nd 2015 at 9:50 PM

Metal balusters come in a choice of styles. Designs are like Gothic, twisted, scrolled or with baskets, open circles, balls or other patterns and you have to choose the right one among the designs. These can be exchanged or different to offer an aesthetically attractive pattern. Installing them can be a bit complicated, but can be done if you are convenient with a drill and circular saw.

You need metal balusters, circular saw for cutting metal and wooden substance, baluster shoes, and drill with multiple bits,Allen wrench, pliers,and epoxy glue.

How to Install Metal Stair Rails

  1. Take away the old balusters by cutting the wood or iron in half with a circular saw. Fit your jigsaw with a metal cutting tool if your balusters are made of metal. Get into each half of the baluster to eliminatewooden or metal stair parts from the railing.
  2. Reach into the old fleapits left by the balusters with pliers and take any loose pieces of wood, iron or adhesive out. Unclog all of the wreckage from the holes.
  3. Measure the degree the hole with a tape. Iron balusters 1/2 inch dense will requisite a 3/4-inch-wide pigpen. Drill the holes till the bottom hole is 3/4 inch profound and the top hole is 1 1/2 inches profound. Use a hole saw involved to your power drill to create these holes.
  4. Measure the space from the uppermost of the stair rail to the bottom, counting the depth of each hole in the railing. Fit the wrought iron baluster from the bottom to equal this measurement. Use a circular saw as well as a metal cutting blade.
  5. Combine the two-part epoxy consistent with the package directions. Insert the epoxy in an epoxy gun. Crush the trigger of the gun to seal a hole in the bottommost rail.
  6. Put spindle shoes on the rail thus they will sit correctly on the baluster once fitted.
  7. Slip the top end of the rod into the hole in the upper rail. Slide the other end of the rod into the hole in the lowest rail.
  8. Secure the spindle shoes to the bottom of the spindle with the built-in screws. Let the epoxy fixed.
  9. Squeeze epoxy into the holein the middle of the top of the spindle and the stair rail. Allow the epoxy to preserve. Slide the spindle shoe into place.


Please to comment

sign in

Remember Me

New to IM faceplate? join free!

Lost Password? click here