Make the Wise Selection of RJ-45 Connectors
Ethernet connections typically use Category 5e or Category 6 cable, which contains four pairs of unshielded twisted pair (UTP) wire. These are terminated using the RJ-45, 8-pin modular connector. The RJ-45 connector is with no doubt one of the most common connector types used in data networks. Choosing the wrong one will often cause grief later, so make sure you end up with the correct one.
What Is RJ45?
The RJ45 connector (see in following image) is standardized as the IEC 60603-7 8P8C (8-position, 8-conductor) modular connector with eight conductors. RJ stands for Registered Jacks. These are typically used in telephone and data jack wiring registered with FCC. RJ-45 is an 8P8C jack applied in 10Base-T and 100Base-T Ethernet wiring.
Just imaging that you're in the market for RJ45 connectors, that means you'll be using them with twisted-pair network cable. Whether that cable is rated Cat3, Cat5, Cat5e or Cat6, it's going to be classified as either solid or stranded.
What Does Solid and Stranded Mean?
“Solid” describes cabling whose conductors are made of solid metal, usually copper. It is mostly used in backbone cable runs through walls and conduit, where flexibility isn't really necessary. While stranded cables are made up of many fine metal filaments, which are twisted together to form the larger, thicker wire. it's commonly used in patch cords and other shorter network cables that need to be able to flex and bend during use.
Choosing the Right RJ45 Connector
If you want to choose the right RJ45 Connector, firstly you should understand which type of cable you're dealing with. Then it's basically a matter of matching cable type to connector type: solid goes with solid, and stranded goes with stranded. Just make sure not to mix and match the two, or you'll end up with a bad connection.
And in order to make a successful connection, a plug's tooth-like contact pins need to properly pierce through the plastic insulation of the accompanying wire. When this is done correctly, the pin is able to physically touch the wire conductor. A connection is made. It's a simple concept to understand, but because of the differences between solid and stranded wire, the insulation-piercing process is a little different for each type.
While solid RJ45 teeth only need to make contact with one wire, stranded RJ45 teeth need to work their way in among multiple strands in order to make a worthwhile connection. The subtle differences between connector contacts can be tough for the untrained eye to identify, but can cause some pretty big problems when paired with the wrong type of cable. Save yourself time, frustration and wasted supplies by verifying that your cable and RJ45 connectors "match".
Ethernet connections typically use Category 5e or Category 6 cable, which contains four pairs of unshielded twisted pair (UTP) wire. These are terminated using the RJ-45, 8-pin modular connector. RJ-45 Connector are also used in copper network systems. Fiberstore offers a large variety of copper cables and copper SFP, such as Cat6 patch cables, Cat5e patch cables, copper SFP modules, etc. These modules like SFP-1GE-FE-E-T and GLC-T 1000BASE-T SFP are fully compatible with major brand. For further information, please feel free to contact us.