yx1991

Laminate flooring solutions to common problems

Jun 3rd 2015 at 10:16 PM

One problem: to strengthen the floor board bagging why? 1, the wall joints of the space left is not enough; 2, ground moisture is too large; 3, blisters; 4, the size of the room is more than 10mX10m; 5, the door and the radiator is not enough to stay below the expansion joints; 6, the floor is too dry.privacy fence images

Solution: 1. Expanding joints to 12m m; 2, rework, do waterproofing; 3, non blisters; 4, the middle partition did bridge; 5. Added sawing, leaving expansion joints; 6, improve indoor air circulation.

Question two: Why upturned seams? 1, sizing too much; 2, mop the floor too much moisture; 3, not timely rain blisters dry; 4, density is too high, greater than 0.96.roofing wood plastic structures

Solution: 1. Expanding joints to 12m m; 2, rework, do waterproofing; 3, non blisters; 4, the middle partition did bridge; 5. Added sawing, leaving expansion joints; 6, improve indoor air circulation .

Question three: Why the gap is too big? 1, the bonding strength is not good, not enough glue, poor quality glue; 2, the installation is not taut; 3, no hammer tight gap during installation.painting wood tongue and groove porch

Solution: 1, to replace the high-quality adhesives; 2, after the completion of construction with tension band is tightened more than two hours; 3, conserve more than 12 hours, the period allowed to move around the room; 4, try to hammer close the gap during installation.

0 comments
Please to comment

sign in

Username
Password
Remember Me


New to IM faceplate? join free!

Lost Password? click here