|riversidegaragedoor is not in any groups|
|If you want to get the best company for fixing garage door issues in Riverside. We provide affordable garage door and garage door opener repair, parts and service to customers in Riverside, CA. Call us now (844) 334-7017.
How To Release Garage Door Spring Tension
Garage door torsion springs are usually under immense tension. This tension present in the garage door springs is what keeps the garage from smashing down hard when it is let down. Moreover, it aids in lessening its weight once the garage door has been lifted up off the ground. The release of garage door spring tension may be necessary when there is need to adjust or fix your garage door. A good example is during garage door spring repair when there is a broken garage door spring. It may also be necessary when you just want it to be a little lighter during the opening of the garage door. It is fairly uncomplicated to release the spring tension in your garage door and this can be performed quite easily and quickly.
Firstly, it is imperative to take in to consideration that the springs used in opening and closing a garage door hold up the whole weight of the garage door. This creates excessive tension in these springs and therefore any rapid and unrestrained release of these springs may be dangerous and could cause serious bodily harm or damage property. One should use the correct tools and follow safe procedures. Moreover, one should avoid executing this task alone.
To release garage door spring tension, you should have the right tools. These may include a vise grip and a stepladder. With the right equipment in place, the following steps can be used to release tension on garage door springs.
· Releasing the rope on the garage door
The rope is usually attached to the ceiling and is in connection with the power head which is on the garage door opener. By releasing the rope on an automatic garage door opener, the door will be able move easily manually. The rope can be released by pulling down on the garage door.
· Complete opening of the garage door to release spring tension.
With extension spring hardware, the tension in the springs usually fades away almost entirely the moment the garage door is opened completely. The garage door should be lifted up to so as to open fully. This helps to releases the tension in the springs.
· Using a vice grip to support the garage door,
With the tension in the springs released, position a vice grip on top of the tracks underneath the bottom rollers below the garage. This helps is holding the door to keep it open. The garage door should then be opened completely and restricted in this position with locking pliers or clamps or firmly tightened to the track to avert the closing of the door..
· Adjustment of the cable
Standing on a stepladder, take hold of the cable so as to pull the spring to some extent. This will release the spring tension. S-hook should then be unhooked from the track at the same time as you slowly and gently release the cable, permitting the spring to go back to release the spring tension in the garage door. The cables can now be released and the springs taken off without any trouble or hazard. Subsequently, take off the locking pliers or the clamps and close the door slowly.
Once the garage door spring tension has been released, procedures for adjusting or fixing the garage door or its parts can then continue e.g. garage door spring repair or when want to replace your existing door with a new one.