followers view all
following view all
|healthcareplans is not in any groups|
|Health And Fitness|
Check out 7 tricks to say goodbye polka dot enamel
Time to paint your nails , one of the common problems faced by women are the balls in the glaze . The effect, which may arise as a result of various factors, can ruin not just a beautiful decoration created, but also the mood of any person.
Balls in the glaze can be avoided
If you have been a "victim" of balls in the glaze , knows what we're talking about. But take it easy: taking a few precautions , you can avoid this hassle. Learn in this article 7 tricks to circumvent this problem. https://www.apsense.com/article/hypothyroidism-revolution-treatment-of-low-thyroid-function.html
Be attentive to the temperature of the hands is way to avoid the balls in the glaze. Photo: Shutterstock
7 tricks against the balls in the glaze
1 Attention temperature of hands
One of the main culprits of the balls in the glaze is temperature. If the hand is hot, they will probably arise. There are two very simple tips to resolve the situation. The first is to be applied at home : before painting the nail, let's hand to soak in a pot with water and ice.
The second tip is to be applied outside the home, as in salons: the hand receiving the enamel must hold a bottle of cold water , while the professional paints. Both techniques ensure a cold hand, which can avoid the balls.
2 Wait dry
Ideally, at first, spend a lisinha layer of enamel on the nail, allow it to dry and only then spend another layer again. If you do not give the necessary time for the polish dry, involuntarily, the balls will arise.
3 Care of the top coat
The top coats are great to let the glaze brighter , better color that was painted, take some imperfections and even drying dye. However, it is necessary to take some care when passing it.
Top very thick coats may also be responsible for the appearance of balls in the glaze . The solution may be to try the version of other brands until you find the ideal, it is not thick.
4 Press the balls
If you spent the enamel, did everything right, and even then, the balls appeared, an option may be tightening them. While the glaze is half wet and half dry, pop the balls and use the top coat to correct the imperfections that were on site.
5 Avoid hot glaze
Besides the hot hand, another problem that can cause the appearance of balls in the enamel is the temperature of the own enamel . You need to keep it in ventilated places, away from excessive heat . If you notice he is a bit hot, the solution may be to leave him under the tap for a while.
6 Find the ideal environment
Paint your nails in an open environment or in front of the fan may be bad ideas. Currents wind can be a major cause of balls in the glaze .
In salons, the main threat usually the dryers hair. The solution is normally stay in the room with the door closed and no fan on. Ie, find a closed environment.
7 EYES within validity
While it is obvious, many people end up forgetting to check the validity of glazes. Sometimes they are months - or even years - kept in the corner forgotten and gloomy closet, and when you think, is already won. Then seek always use products within the validity.
|share||like 13||report||94 views|