followers 3 popularity
following 1

followers  view all

following  view all

oliviagrey is not in any groups


Interested in surfing Internet, Gadgets and listening to instrumental music.
Olivia Grey | oliviagrey

Guidelines For Purchasing A Xerox Fuser

Aug 24th 2015 at 12:03 AM

That fresh sheet of paper that you just took out was a bit warm, wasn't it? Well that's due to a certain component of printer for which the terminology employed is fuser. Still dazed as to how it occurs. Well to be precisely put, it comprises of dual rollers which are in tandem put in action to ensure that the toner is fused into the paper. Directly or indirectly it ensures that the lingual testament which you want on the paper is optimally delivered by the Fuser. Given its above stated importance, it becomes an important task to ensure that we buy the correct fuser unit for our printers and setting a benchmark in this very category are the Xerox Fuser Units.

Let's define a few vital parameters before you set out to buy that Xerox fuser:


Time is of paramount importance when it comes to buying a new fuser unit. It depends on the regularity with which you are accustomed to use your printers. Therefore, the replacement of a fuser unit is directly proportional to the amount of workload you bestow upon the Printer and hence by extension, fuser. For instance, if the printer is to be installed in an organisation, well then the lifetime of a toner would be much shorter than when the printer or photocopier will be put to work at home and used merely to print school assignments and the likes. A cue which might help you with the dated expiry of the fuser unit is the appearance of inexplicable lines on the sheets. That pretty much ensures that it is about time to buy a new fuser unit.

Heating Element

Post defining the longevity, we can all but explore the elements responsible to the termination of fuser units. It is all in the manufacturing per se. Fuser does suggest fusion or to be precise heat. And in ensuring that the toner is utilised with precision on the paper, reaching the optimal temperature is quite vital. Hence we should explore the genesis of the heating component before we add any Xerox Fuser unit to our buy cart.

There are namely two sort of heating elements:

1) Halogen Bulb
2) Ceramic Heating Element

Ceramic Heating element has a tendency to reach the operating temperature with much swiftness and hence lasts longer and therefore ensures that the ceramic laced fuser unit is of higher monetary value. But of course due to its less likeliness to be changed sooner, it is a value buy.


Let's face it! We are common people with bare minimal knowledge as regards the technical insights which go into the making of such complex hardware. But at the end if the day, you have to install it and ensure its maintenance. Hence the feasibility of manual instructions becomes a vital parameter and this is exactly what sets Xerox Fuser units apart from its competitors. You can access all the instructions online at any point of time and the lucid nature of the language ensures that the buyer feels at home. Well I hope you now know what really needs to be considered before you decide to make that order of Xerox Fuser Unit.

Please to comment

sign in

Remember Me

New to IM faceplate? join free!

Lost Password? click here