followers 3 popularity
following 1

followers  view all

following  view all

MichealHAlexander is not in any groups

Bottlenose Half Mounts

Feb 6th 2020 at 5:12 AM

The Bottlenose Dolphin can hold its breath for up to 10 minutes, which comes in handy since they can also dive to over 1550 feet!! (Just because they can dive this deep does not mean they like spending most of their time down that far, that is why you are use to seeing them swimming and playing at the surface of the water). Bottlenose dolphin are not only amazing with their qualities but they also have a majestic feel to them. Watching them jump out of the water, play in the wake behind your boat or simply just swimming along with their friends is definitely something you will remember for a lifetime. Our Bottlenose half mounts are anatomically correct half fish replicas that are intended to be displayed on the wall. A half sided mount is produced by casting the front part of our two sided wall mount molds. When displayed the circumference of the half mount is either touching the wall or very close to the wall. This process cuts labor and supplies cost and therefore results in a lower price point however the skin texture and finishing process is the same as a traditional full mount. Fish Mount Combo

Bottlenose Half Mount Paint Schedule

We do not custom paint our half mounts but regular paint schedule is to paint the porpoise "lit up" and alive which is most likely what you are looking for and what most customers really appreciate. Bottlenose dolphins are normally very greyish with a white belly and the final step is to clear coat the sailfish with a UV Protective Urethane clear coat. These beautiful dolphins are perfect pieces of decoration for your new house, office or Florida room.

Shipping Your New Bottlenose Dolphin Mount

Our packaging team is experienced and completely understand the importance of superior packaging to ensure a damage free transit. In the event that the shipping carrier decides to run over your package with their truck or something catastrophic happens we will instantly replace the damaged mount and please keep in mind all of our fish mount come with a money back guarantee.

Installation Of Your Bottlenose Dolphin Mount

Your new Bottlenose Dolphin half mount will arrive with a resin hanger attached to the backside of the half mount that runs parallel to the ground. Hold the half mount up on the wall, mark the spot where the hanger touches the wall, drill in a couple screw or hammer in a couple nails and then hang your new Porpoise half mount. If you are intending to put this outside permanently we do have some additional hardware options. Please contact us prior to ordering to discuss those costs.

Please to comment

sign in

Remember Me

New to IM faceplate? join free!

Lost Password? click here